JT-H2 在线压力传感器,JT-H2
拟稿人:珠海康宝莱仪表有限公司
JT-H2 在线压力传感器简单介绍
JT-H2 在线压力传感器The Model JT-H2 Pipe Line Pressure Sensor is used with the X76LVC or the X76LVCS Leak Detection Systems. The Model JT-H2 does not require a mechanical regulator. This state of the art approach to the line leak detection provides the highest level of protection against leaking product into the ground for short or extended periods of time.
JT-H2 在线压力传感器的详细介绍
JT-H2 在线压力传感器
Pipe Line Preasure Sensor [JT-H2]
The Model JT-H2 Pipe Line Pressure Sensor is used with the X76LVC or the X76LVCS Leak Detection Systems. The Model JT-H2 does not require a mechanical regulator. This state of the art approach to the line leak detection provides the highest level of protection against leaking product into the ground for short or extended periods of time.
The Model X76DM-4B Line Leak Controler Module and JT-H2 Line Pressure Sensor monitor product supply lines for leaks greater than .05 gph. If a leak is detected, the Line Leak Module automatically shuts down the submersible pump, unlike mechanical regulators which allow continuous pumping. With a typically leak rate of 3 gph, mechanical regulators bring added clean-up costs and product loss.
|
JT-H2 在线压力传感器Leak Detection Measurement
CSLD & Inventory Management
Leak Detection & Inventory Management.
Environmental Management Software
Single or Double-wall Line Monitors
Hydrocarbon Vapor Monitors
Above Ground Tank Monitors
|